Licensed & Insured · CA License #1055298 Permits handled for you 5.0 on Google
Home / Pool Removal / Partial vs Full
Bay Area · Methods

Partial vs Full Pool Removal: Which One Do You Need?

By Mateus Lima, owner of Bay Demo, CA License #1055298 · Updated

Quick answer
  • Partial removal (also called fill-in or abandonment): drainage holes in the floor, the top of the walls taken down, the pool filled and compacted. Lower cost. The area is for landscaping.
  • Full removal: the whole shell comes out and the hole is filled with compacted soil. With an engineer's compaction report, the area can be built on.
  • Our recent written estimates: partial $10,500 to $11,500, full $18,000 to $21,500, permit included.
  • Choose by what you want on that spot in the next 5 to 10 years, not by today's price alone.

Partial and full pool removal side by side

Partial removalFull removal
What comes outTop of the walls and pool equipment; the shell staysThe whole shell, walls, floor and usually the deck
DrainageHoles broken in the floor so water drainsNot needed, the shell is gone
FillClean soil, compactedClean soil compacted in layers, often tested by an engineer
Can you build there later?No, landscaping only (in the cities we have checked)Only with engineered fill and the engineer's compaction report
Recent Bay Demo price$10,500 to $11,500$18,000 to $19,000 without an engineer; $19,000 to $21,500 with engineered fill (buildable)
Best forLawn, garden, turf; keeping cost downADU, addition, patio slab; selling to a buyer who may build

How Bay Demo does a partial removal

  1. Permit. We apply with your city and include it in the price.
  2. Drain and disconnect. The pool is drained the way your city allows, and the pump, filter and heater come out.
  3. Drainage holes. We break three holes, each about 3 ft wide, in the pool floor so water can drain out of the old shell.
  4. Walls down. The walls are taken down 2 ft below grade.
  5. Fill and compact. Clean soil goes in and is compacted.
  6. Final inspection. We stay until the city signs off.

Some cities set their own numbers. Pleasanton asks for an opening of at least 24 inches at the lowest point and the whole bond beam removed. Cupertino asks for at least three 12-inch holes, 8 inches of compacted gravel and filter fabric. We follow whatever your city requires.

Source: City of Pleasanton: Pool Demolition Requirements (PDF, rev. 01.26) (opens the official site) · City of Cupertino: Swimming Pool Removal Requirements (PDF, 3/2024) (opens the official site)

What full removal and engineered fill mean

In a full removal the shell, walls and floor are broken out and hauled away, and the hole is filled with clean soil in compacted layers. When the area must be buildable, a geotechnical or civil engineer tests the fill and signs a compaction report for the final inspection. That is what "engineered fill" means.

Pleasanton calls this Option 2: fill in 6 to 12 inch lifts compacted to 90% (ASTM D1557), with a compaction report at the final. Cupertino calls it Option B: fill certified by a licensed engineer, with a report stating the area is suitable for future construction.

Source: City of Pleasanton: Pool Demolition Requirements (PDF, rev. 01.26) (opens the official site) · City of Cupertino: Swimming Pool Removal Requirements (PDF, 3/2024) (opens the official site)

How to choose

  • You want lawn, garden or turf and plan to stay. Partial removal is usually enough.
  • You may build an ADU, an addition or a slab. Full removal with engineered fill. Doing it later costs more than doing it once.
  • You may sell in the next few years. Either way, keep the closed permit and the final inspection record. Tell us your plans and we price both.
  • Your city only allows one method. Then the choice is made for you. See the rules for your city on our pool removal permits page.

Partial vs full pool removal: common questions

Can you build on a partially removed pool?

Not in the cities we have checked. Pleasanton (Option 1) and Cupertino (Option A) both limit the area to non-structural use. To build, you need a full removal with engineered fill.

Is a partial pool removal permitted?

Yes, in the cities we have checked it is a permitted, inspected method. Pleasanton and Cupertino both list it as an option in their pool removal requirements.

What is engineered fill?

Fill placed in compacted layers and tested by a geotechnical or civil engineer, who signs a compaction report for the final inspection. It is what makes the area buildable.

Can the ground settle after a partial removal?

It can. Cupertino notes that an area filled with the shell left in place may settle, which is one reason it is limited to landscaping. Good drainage holes and compaction reduce the risk.

How much more does a full removal cost?

In our recent written estimates, about $6,500 to $11,000 more than a partial removal for a typical backyard pool, depending on access and whether an engineer is needed.

Keep reading

Official sources

Mateus Lima, owner of Bay Demo Mateus LimaOwner, Bay Demo · CA Lic. #1055298 5.0 on Google

Step 1 of 2

When do you want to start?
Hi, I'm Mateus. When would you like to start?I book on-site estimates in the order requests come in.
Pool Removal ·
Great. Where's the project, and how can I reach you?Last step.
Please enter your name.
Please enter a valid 10-digit phone number.
So Mateus can check the property and permits before the visit. Please enter the project address.
Please enter a valid email.

★★★★★ Matt, the owner, came promptly to look at the work and was able to give me a quote on the spot. Varun Varma, Google review

You talk to the owner, not a call center.

Prefer to talk? Call (510) 953-4477
Call Now Get My Price