Licensed & Insured · CA License #1055298 Permits handled for you 5.0 on Google
Home / Blog / Pool Removal
Pool Removal

What Is a Pool Bond Beam, and Why It Comes Out First

By the Bay Demo team · Updated · 5 min read

Broken concrete pool shell and bond beam during a Bay Demo pool removal
Quick answer
  • The bond beam is the thick, reinforced concrete edge that runs around the top of an inground concrete pool. It holds the walls together and carries the coping and tile.
  • In a pool removal it is the first thing that comes out: it is the strongest, most reinforced part of the shell.
  • Even in a partial removal, cities like Pleasanton require the bond beam to be removed around the full perimeter before the pool is filled.

Most homeowners have never heard the term, but every quote for a concrete pool removal is shaped by it. If you are comparing estimates, knowing what the bond beam is, and what happens to it, tells you a lot about how a contractor plans the job.

What is a pool bond beam?

A gunite or shotcrete pool is a concrete shell. Around the top of the walls, the shell gets thicker and carries more steel: that ring is the bond beam. It ties the walls together, resists the pressure of the soil and the water, and is what the coping (the cap around the edge) and the waterline tile sit on. From the yard you mostly see the coping, but under it sits the heaviest concrete of the whole pool.

Compact excavator with a hydraulic breaker breaking the concrete bond beam at the edge of a pool
Breaking the bond beam: the thick, reinforced top edge comes out first.

Why it comes out first

  • It is the strongest part. With the top ring still in place, the walls stay locked together. Once it is broken, the walls and the floor come apart much more easily.
  • It sits right below the surface. Anything left near the top of the old pool ends up under the new lawn, patio or pavers, where it can cause uneven settling or get in the way later.
  • Cities ask for it. Where a pool removal needs a permit, the work is inspected during the removal, before the fill goes in.

Partial removal: does the bond beam still come out?

Yes. A partial removal (also called a fill-in or abandonment) leaves most of the shell in the ground, but not the top. In Pleasanton's pool demolition rules, the bond beam is removed around the full perimeter, the floor is opened so water can drain into the soil, and only then is the pool filled. Other Bay Area cities have their own versions of the same idea, so check yours in our pool removal permit guide.

In a full removal, the bond beam is just the start: the entire shell comes out, down to native soil, and the fill is compacted and tested.

What it means for your estimate

  • Equipment: a reinforced edge usually needs a hydraulic breaker on a compact excavator, not only hand tools. Access to the backyard decides which machine fits.
  • Hauling: the bond beam is heavy concrete with steel. It goes to a recycler, and it is never used as fill under a future structure.
  • Coping and deck: ask whether the coping and the deck around the pool are included, and how much of the deck stays.

When we quote a pool removal, we explain exactly what comes out, what stays and how the city will inspect it. See what drives the price on our pool removal cost page, watch a whole job in our start-to-finish video, or ask for a free on-site estimate below.

Frequently asked questions

What is a bond beam on a pool?

It is the thick, reinforced concrete ring around the top of an inground concrete pool. It ties the walls together and carries the coping and the waterline tile.

Is the bond beam removed in a partial pool removal?

Yes. In Pleasanton, for example, the bond beam is removed around the full perimeter and the floor is opened before the pool is filled. Other Bay Area cities have similar rules, so check with your building department.

Can broken pool concrete be used as fill?

Not under a future structure. In a full removal, the broken concrete is hauled to a recycler and the hole is filled with clean engineered fill, compacted and tested.

Mateus Lima, owner of Bay Demo Mateus LimaOwner, Bay Demo · CA Lic. #1055298 5.0 on Google

Step 1 of 2

When do you want to start?
Hi, I'm Mateus. When would you like to start?I book on-site estimates in the order requests come in.
Pool Removal ·
Great. Where's the project, and how can I reach you?Last step.
Please enter your name.
Please enter a valid 10-digit phone number.
So Mateus can check the property and permits before the visit. Please enter the project address.
Please enter a valid email.

★★★★★ Matt, the owner, came promptly to look at the work and was able to give me a quote on the spot. Varun Varma, Google review

You talk to the owner, not a call center.

Prefer to talk? Call (510) 953-4477
Call Now Get My Price